Accuair E-Level Controller with Rocker Switch
Click to enlarge |
|
The e-level controller offers the ability to save three unique vehicle heights into memory at the touch of a button using TruPosition Height Sensors installed in each corner of your suspension. These three heights are then instantly accessible from the TouchPad or Rocker Switch Interface. The key to this technology is AccuAir’s proprietary RideMonitor Mode; While parked OR driving, the system will maintain the vehicle height when loading or unloading passengers and cargo or when road conditions change while driving. All of this automatic intelligence is unnoticed by the driver providing improved ride quality and handling characteristics for any vehicle with Air Suspension. The adjustments made by an e-Level controller are so accurate that each wheel maintains its height within 1/8th of an inch and prevents “cross-loading” of air springs at a higher accuracy than any other method. This is all made possible because the system calibrates to the vehicle upon installation and then learns how your air suspension behaves over time. This flexibility allows the e-Level controller to be used on any vehicle with a wide variety of valve speeds and requires NO user tuning.
When mounting space and cost are paramount, the Rocker Switch Interface is a simple, yet effective solution. The primary function of the Rocker Switch is to access your three saved heights by pressing UP or DOWN to raise or lower between saved heights (current vehicle height is indicated by red and green LED lit arrows). A small program button (usually hidden under the dash) allows you to toggle through functions like manual control over each air spring individually, manual control over front and rear air springs in “pairs”, re-saving each of your heights, and adjusting system preferences. Note: This system has the same exact functionality as the e-Level Controller w/ TouchPad and will also work with the TouchPad simultaneously if needed. All of this makes it possible to upgrade to the TouchPad down the road if desired.
Kit Includes:
- Electronic Control Unit (ECU)
- Rocker Switch Interface & Main Harness
- Ride Height Sensors with Linkage
- 4-Corner Height Sensor Harness
- 4-Corner Solenoid Valve Harness
- 0-200 PSI Tank Pressure Sensor
- Stainless Steel Mounting Hardware Package
- Illustrated Instruction Manual
Specifications:
- Compatible Suspension Type: 4-Corner Full Air Suspension (any brand, any vehicle)
- Voltage: 9.5-16 Volts
- Amperage: 15 Amps (Max)
- Valve Output: (8) 12 Volt Solenoid Valves up to 3 Amps Each
- Tank Pressure: 110-150 PSI
- Leveling Response Time: 5 Seconds Parked / 45 Seconds Driving
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: